- New
2 in 1 laser marking machine
Adopting a highly integrated design with lightweight components, the ATOMSTACK M4 allows you to use it in both desktop and portable mode, for example for marking on non-horizontal surfaces, walls and facades.
Electrical power 20 W, optical laser power 2 W, infrared wavelength 1064 nm
It has an electrical power of 20 W for the entire machine and an optical power of 2 W with a peak pulse of 20000 1064 W.
Unlike the blue light source, the length of XNUMXnm infrared wave is a cold light source, which is suitable for rapid marking on all metals and ABS, and even if you accidentally touch the screen, you will not be burned, which can avoid injury.
Industrial Galvanometer Technology
Atomstack M4's industrial-grade galvanometer technology effectively reflects light and allows for higher speed (compared to gantry-mounted lasers), in addition to a more tuned laser frequency since the laser beam source is stationary.
Improved compressed stitch technology
The ultra-fine laser focus area is reduced to 0.
02mm in diameter, and the minimum markable character is approximately 0.
06mm*0.
15mm (tested with focusing film).
Fine engraving
The ultra-long and ultra-thin 0.
01-0.
02mm end-pumped infrared laser can present every engraving detail, perfectly presenting 4K level high pixels.
Precise positioning
Atomstack M4 adopts dual infrared light positioning design, which can accurately locate the marking position without offset.
One-touch repeat engraving
The marking machine has a one-key repeat marking function, which can repeat the work in one click, without computer operation, and effectively complete batch customization work.
Engraving area 70*70mm, easy to install
There are precision scale lines on the lifting shaft, which allows you to quickly measure the length.
The large engraving area of u200bu200b70*70mm can meet your various engraving needs.
Additionally, the entire structure is designed for quick installation and can usually be installed in 10 to 20 minutes.
Wide Compatibility
The machine uses mature engraving software and supports Win XP/Win 7/Win 8/Win 10/Win 11 Engraving files support PLT, DXF, BMP, JPG and JPEG image files; Code39, EAN, PDF417, DM barcode, QR code and dynamic files.
General | Brand: ATOMSTACK
Type: Laser marking machine Model: M4 Color: steel gray |
Specification | Electrical power: 20 W
Laser life: ≤20000H Standard speed: 12000 mm/s Engraving size: 70*70mm Marking repeatability: ≤0.001 mm Total power: supply voltage 12 V, power ≤ 100 W Data transmission method: USB transfer Maximum height of the object to be engraved: 70 x 70 mm Bracket material: metal bracket Laser Wavelength: 1064nm Marking precision: ≤ 0.001 mm Switch: Standard Power supply: 100-240 V AC, 50/60 Hz, output: 12 V 8 A Operating software: supports Win XP/Win 7/Win 8/Win 10/Win 11 Supported file formats: supports PLT, DXF, BMP, JPG, JPEG and other image files; supports Code39, EAN, PDF417, DM and other 1D barcodes and 2D barcodes; support for marking dynamic files Scope of application: common metals and alloys (all metals such as iron, copper, aluminum, magnesium, zinc, etc.), rare metals and alloys (gold, silver, titanium) , metal oxides (all kinds of metal oxides are acceptable), special surface treatment (phosphating, aluminum anodizing, electroplating surface), ABS material (electrical appliance shell, daily necessities), ink (keys transmitting light, printed products), epoxy resin (electronic component packaging, insulating layer), leather, wood (paint), ceramic (painted), stone, etc. |
Weight and height | Product weight: 5.76kg
Package weight: 5.89kg Product size (L x W x H): 310 * 200 * 275mm Package size (L x W x H): 390 * 250 * 335mm |
Package contents | 1 x laser components
1 x marking cover 1 x lifting shaft 1 x base cover 1 x USB reader 1 x focus sheet 1 x hex key 1 x Goggles 1 x USB cable 1 x Power Cable 1 x adapter 1 x positioning plate 1 x set of calibration paper 1 x Instructions for use |
Specific References
No customer reviews for the moment.