• New

    SCULPFUN S30 Ultra 11W laser engraver

    Review (0)
    €718
    Tax excluded
    In stock
    BRAND: SCULPFUN
    EASE OF PAYMENT, 4X
    EXPRESS SHIPPING IN 4 DAYS: FREE
    EUROPE DELIVERY: WITHOUT TAX ON ARRIVAL GUARANTEED
    Quantity :

    Strengths


    Main Features of the SCULPFUN S30 Ultra 11W Laser Engraver

    The SCULPFUN S30 Ultra 11W laser engraver sports a giant engraving size of 600*600m, with the same support system of automatic air than the S30 series Coupling an enhanced linear guide rail with a 0. 08 x 0. 08mm focus point, the S30 Ultra allows you to create custom engraved products with a wide variety of materials with the best precision possible.

    • Automatic air assist
    • Laser focus 0. 08 x 0. 08 mm
    • Replaceable lens
    • Improved linear slide
    • Bluetooth
    • Emergency stop
    • Key lock
    • Engraving size 600 *600mm


    Large engraving area 600x600mm

    SCULPFUN S30 Ultra offers an engraving area of u200bu200b600 x 600 mm, eliminating the need to accessorize an expansion kit in the future when large scale cutting is required.


    Improved laser power of 11 W

    The Sculpfun S30 Ultra 11W laser uses 2 x 6W diodes, allowing it to cut 10mm balsa wood and plywood of 6 mm separately in a single pass and is the unrivaled choice for amateurs.


    Improved 42-bit stepper motor

    It adopts an upgraded 42-bit stepper motor which provides enough power to move the machine at high speed.
    The torque reaches 4. 2 Kg·cm (ordinary machines are 3 . 1 Kg·cm).
    In future upgrades, even if the laser or load becomes heavier, there is no need to replace the motor.


    Built-in high pressure air-assisted nozzle

    SCULPFUN S30 Ultra series is equipped with an advanced air-assisted high-pressure metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency , and the cutting speed is more than 5 times faster than that without air assistance.
    .
    The powerful airflow removes residue, making the cutting surface very clean.


    Replaceable protective lens

    SCULPFUN S30 Ultra series laser engraver uses an innovative replaceable lens, which greatly improves the lifespan of the laser and is more than 10 times longer than other general lasers.
    When the lens is damaged or after prolonged use, the lens can be replaced to restore its cutting power.


    Upgraded 32-bit air-assisted motherboard

    The latest 32-bit motherboard supports an air-assisted automatic control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.


    Industrial grade cutting precision

    The SCULPFUN S30 Ultra adopts an extremely strong high-precision 0. 005mm linear slide X-axis to achieve industrial-grade engraving accuracy.
    When comparing small engraving details , the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.


    Professional Security Design

    It is equipped with an emergency stop switch and a child lock.
    In an emergency, pressing the emergency stop switch can stop the machine ; after removing the key, the machine cannot be turned on, which may prevent children from turning it on by mistake.


    A series A structure

    SCULPFUN S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure and laser cable are all the same.


    Tool box, laser repair box, fixed focus column support

    SCULPFUN S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc.
    , which are all stored conveniently in boxes.
    In addition, a professional fixed focus column storage box is provided on the machine, which is convenient for storing the fixed focus column.


    Strong and durable frame

    Made of high-strength aluminum alloy, its frame can support a weight of up to 50 kg without damage, which is very durable.
    The frame can be used for a long time and maintain high precision, just upgrade the last laser when the machine needs to be upgraded.

    Notes

    • 1 Due to the power of the laser, it It is forbidden to operate the engraving machine unsupervised.
      Pause it if you are not there.
    • 2 For detailed instructions on the machine, please refer to the manual for parameter settings.
    • 3 When using the laser engraving machine, please install the laser protective cover; if it is not installed, you must wear glasses.
    • 4 Do not touch the laser with your hands, otherwise you may burn your hands.
    • 5 Please avoid strong impact on the machine.
    • 6 Children under 14 years old are prohibited from using this product and children over 14 age need adult supervision.
    • 7 Do not apply the laser directly to a specular reflection object, which may injure the operator or burn the laser.


    SCULPFUN S30 Ultra - One step to get the best engravings

    Engraving size 600*600mm - most ideas can be realized.
    11W/22W/33W laser power - new diode technology.
    Improved linear slide - precise and fast Automatic Air Assist - cleaner cuts


    SCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraverSCULPFUN S30 Ultra 11W laser engraver

    General Brand: SCULPFUN
    Model: S30 Ultra 11W
    Specification

    Laser information:
    Diode laser output power: 11W (this is light energy, not electrical energy)
    Laser focus: 0.08 x 0.08 mm
    Laser wavelength 455 ± 5 nm
    Focusing method: fixed focus column + sliding device
    Laser protective cover: equipped with a removable laser protective cover to protect the eyes. You can adjust it up and down or remove the visor.

    Machine information:
    Engraving precision: 0.005mm
    Engraving area size: standard version is 600 x 600 mm
    Electrical power of the machine: approximately 84 W

    Air pump:
    Type: air pump controlled by main board
    Voltage: 24V
    Flow rate: 30 L/min
    Air pipe inner diameter: 7.5 mm

    Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection.

    Material to engrave/cut:
    Carving materials: all kinds of wood (including walnut, cherry and other high density woods), MDF, stone, cardboard, plastic, leather, PCB, aluminum oxide, 304 stainless steel , ceramic, black stone.
    Cutting materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards plastic, circuit boards

    Operating software: LightBurn (with M8 air assist function), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
    Data transmission method: USB connection or Bluetooth wireless connection

    Power input: AC 110V, 60Hz
    Output power: 24V 7A

    Weight and height Package weight: 9.9kg
    Package size (L x W x H): 86.8x25x24cm
    Package contents 1 x S30 Ultra 11W laser engraver
    1 x laser shield
    1 laser repair kit.
    1 24 V automatic air pump.
    Wooden board 2x460*230*3mm
    Aluminum protection plate 2x460*230mm
    2 x Limit switch
    Mains adapter 1 x 24V 7A
    1 x Power Cord
    1 x USB cable
    1 x rubber air hose
    1 x Toolbox
    1 x laser glasses
    Step 1-6 Installation Package
    1 x X axis assembly
    2 x X profiles
    2 x Y-profiles
    1 x control box
    3 support feet
    1 x cable tie bag
    1 x Fixed Focus Column Bracket
    1 x pack of replacement screws
    1 x Non-Slip Seat Pack
    1 x Instructions for use
    55508040

    Specific References

    No customer reviews for the moment.

    Write your review
    SCULPFUN S30 Ultra 11W laser engraver

    16 other products in the same category:

    SCULPFUN S30 Ultra 11W laser engraver

    €718
    Tax excluded