Please read before ordering

1 Due to the power of the laser, it is prohibited to operate the engraving machine unsupervised .
Pause it if you're not there.

2 For detailed instructions on the machine, please refer to the manual for parameter settings.

3 When using the laser engraving machine, please install the laser protective cover; if it is not installed, you must wear glasses.

4 Do not touch the laser with your hands, otherwise you may burn your hands.

5 Please avoid strong impact on the machine.

6 Children under 14 years old are prohibited from using this product and children over 14 age need adult supervision.

7 Do not apply the laser directly to a specular reflection object, which may injure the operator or burn the laser.

Highlights

Automatically controlled air assist system
The S30 series is equipped with a 32-bit air-assist motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving via the M8 button of LightBurn software, making very clean engraving and cutting, and is very suitable for making exquisite gifts.

Integrated high pressure air assist nozzle
The S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and cutting speed. cutting is more than 5 times faster than that without aerial assistance.

Ultra-thin 10W laser
Adopting ultra-thin laser shaping technology, the laser focus of S30 is as thin as hair and very powerful for engraving or cutting.
S30 Pro 10W laser is suitable for frequent cutting, making everything more quickly.

Replaceable protective lens
The S30 series laser adopts an innovative replaceable lens, which greatly improves the lifespan of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after use at In the long term, the lens can be replaced to restore cutting power.

Expandable engraving area
The original engraving area is about 410 x 400mm, while it features an XY axis expandable design, so you can purchase a Y axis expansion kit to expand the engraving area at 935 x 400 mm; Buy an XY axis extension kit to upgrade up to 935 x 905mm engraving area, which can help you better handle large area engraving or cutting jobs.

Upgraded 32-bit Air Assist Motherboard The latest 32-bit motherboard supports automatic air assist control and reserves Bluetooth and SD card offline printing function.
(Upgrade kit sold separately)
Industrial grade cutting precision
The extremely strong and high precision 0. 005mm linear slide rail does not have the wavy pattern that appears in ordinary engraving machines.

Sturdy and durable aluminum alloy frame
Made of high-strength aluminum alloy, its frame can support up to 50 kg of weight without damage and is very durable.
The frame can be used for a long time and maintain high precision, just need to upgrade the latest laser when the machine needs to be upgraded.

Security design
The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in case of emergency.

Right angle measuring ruler
There are precise scale lines on the X axis and Y axis to form a right angle measuring ruler, which allows you to quickly measure the size of the engraved object.

General

Brand: SCULPFUN
Type: Laser engraving machine
Model: S30 Pro 10W
Blue color

Specification

Laser information:
Diode laser output power: 10W (note: this is light energy, not electrical energy)
Laser focus: 0.06 x 0.08 mm
Laser wavelength: 455 ± 5 nm
Focusing method: fixed focus column + sliding device
Laser protective cover: Equipped with a removable laser protective cover to protect the eyes. You can adjust it up and down or remove the glasses.

Machine information:
Engraving precision: 0.005mm
Engraving area size: the standard version is 410 x 400 mm, which can be expanded to 935 x 400 mm or 935 x 905 mm
Machine power: approximately 60 W

Engraving area after installing the limit switch:
S30: 380x385mm
S30 Pro: 380 x 385 mm
S30 Pro Max: 370 x 363 mm

Air pump:
Type: air pump controlled by motherboard
Voltage: 12V
Flow: 30L / min
Air hose inner diameter: 7.5 mm

Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade kit sold separately)

Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB, aluminum oxide, 304 stainless steel, ceramic, black stone
Cutting material: all kinds of wood (including walnut, cherry and other high density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, boards of printed circuits

Operating software: LightBurn (with M8 air assist function), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports Windows system, support MAC system
Supported file formats: NC, BMP, JPG, PNG, DXF and other image formats
Data transmission method: USB connection or Bluetooth wireless connection

Power Input: 100-240V AC, 50/60HZ
Output power: 12V 7A

Weight and height

Product weight: 6.96kg
Package weight: 15kg
Product size (L x W x H): 230 * 235 * 625mm
Package size (L x W x H): 260 * 500 * 650mm

Package contents

1 S30 Pro laser engraver
1 laser repair kit.
1 12 V automatic air pump.
3 A4 format wooden boards of 3 mm
2 x Limit switch
Power adapter 1 x 12V 5A
1 x Power Cord
1 x USB cable
1 x air tube
1 installation tool kit.
1 x laser glasses
1 x A4 metal backing plate
Step 1-6 Install the package
1 x X axis assembly
2 X profiles
2 Y profiles
1 x control box
3 support feet
1 x Instructions for use