Highlights

1 100% installed, plug and play: The machine is 100% installed in the package, equipped with an adapter cable, and only needs to be connected to the Y axis wiring of the laser engraving machine to engrave cylindrical objects, such as pens, water bottle, etc.

2 Large engraving space and 4 feet lifting: SCULPFUN roller base design is lower and stable, and equipped with 4 sturdy metal lifting feet, so it has a larger engraving diameter of 6-150mm, which can meet more of engravings.
need.
Metal feet are stronger than plastic feet and the machine is more stable when engraving.

3 Setting sliding shaft spacing: SCULPFUN roller adjusts the size of the gap between the two shafts by sliding and fixes the shaft by turning the knob by hand, which is simpler and faster than traditional adjustment of shafts multi-step fixing holes.

4 100% original scale high precision engraving: SCULPFUN roller adopts 70A high friction rubber shaft to prevent slipping, and speed linear of the rotating surface has been accurately calculated.
Directly plug in the cable of the engraving machine to engrave the original image in 100% proportion.
Does not enlarge or reduce the image .

5 Wide compatibility: SCULPFUN roller is suitable for multiple engraving software such as lightburn or laserGRBL, and it can be used directly, no need to set any parameters.
Plus, it can be applied to 95% of engraving machines on the market such as SCULPFUN, NEJE, Ortur, ATOMSTACK, etc.

6 Free useful accessories: a free soft ruler for measuring the object size; 4 free lifting feet, which can be used to increase the height of a variety of machines.

Brand: SCULPFUN
Type Laser rotating roller
Model: Main unit
Color: Gray

Specification

How to use: Disconnect the Y axis motor wiring of the laser engraving machine, connect the SCULPFUN rotary roller to the cable of the Y axis and you can start using it. There is no need to set parameters in the software because the surface linear speed of the roller is the same as the original speed of the Y axis.

Available engraving space: diameter of the cylinder 6-150 mm, cylinder length 0-230 mm

Compatible software: Lightburn, LaserGRBL, Benbox, GrblController, LiteFire, etc. There is no need to configure software because the surface linear speed of the roller is the same as the original speed of the Y axis.

Compatible machines: suitable for all types of machines of GRBL motherboard engraving machines, including SCULPFUN, Ortur, NEJE, ATOMSTACK and other engraving machines.

Shaft spacing adjustment: The shaft spacing can be adjusted steplessly by sliding, and it can be fixed by tightening the screws by hand.

Weight and height
Package weight: 1.5kg
Product size (L x W x H): 27 x 22 x 5cm
Package size (L x W x H): 34 x 25 x 9cm
Package contents

1 × roller device
1 × Type A wiring
1 × Type B wiring
4 × Raise your feet
1 × screw bag
1 × soft ruler
1 × User Manual