- New
Integrated high pressure air assist nozzle
The P1 Pro 20W nozzle has an advanced fluid mechanics design to better utilize air pressure.
When using the same air compressor, the P1 Pro 20W series sprays the air flow faster.
Advanced pneumatic assistance and high-power laser can accelerate material combustion and residue removal, significantly improve cutting performance, and make laser cutting faster and cleaner.
20 W quad-laser technology
Equipped with 20W laser head, its spot size is 0.
08*0.
1mm, bringing delicate laser light, concentrated energy and higher cutting efficiency.
Focus controller
The rotating sliding table and fixed focus knife can precisely control the focal length adjustment of the laser module to make the engraving image finer.
Adjustable air flow
The automatic air pump is very durable.
It works with the 32-bit air assist motherboard to realize automatic air assist.
Stronger cutting penetration
P1 Pro high speed air assist and high energy density lasers both increase cut penetration.
Available to cut more materials, and also easier to deal with high density woods .
Upgraded 32-bit motherboard
The P1 motherboard uses 32-bit chips, with faster computing speed, and it always reserves the Z axis and limits the switching functions to be upgraded.
It still perfectly supports desktop software.
laser cutting like Lightburn and LaserGRBL.
Top-notch security
The P1 Pro 20W laser engraver is equipped with an emergency stop switch, a key switch and an instantaneous move/tilt stop device, which can stop work urgently if any abnormality is detected in the sculpture.
Wide Compatibility
This machine works well with LightBurn and LaserGRBL, supports Windows, Mac OS, iOS and Android systems, and the engraving file supports SVG, NC, BMP, JPG, PNG, etc.
General | Brand: ACMER
Type: Laser Engraver Model: P1 Pro 20W Color: Gray |
Specification | Spot size: 0.08 x 0.1 mm
Engraving precision: 0.01 mm Engraving speed: 10000mm/min Engraving size: 400x390mm Engraving method: USB/APP/online/TF Laser power: 20W Laser wavelength: 450 + 5 nm Supported systems: MAC, Windows, Linux Machine material: aluminum profile + iron sheet Electrical requirements: DC 24 V 4 A Motherboard: ESP32bits File format: SVG, NC, BMP, JPG, PNG and GCODE Software support languages: English, German, Italian, French, Chinese Engraving materials: wood, plastic, paper, leather, bamboo, stainless steel, acrylic, glass, etc. Engraving method: image engraving, text engraving, scanning engraving, concave and convex engraving Safety protection: horizontal gyroscope/emergency stop switch/power switch lock. |
Weight and height | Product weight: 6.2kg
Package weight: 8.3kg Product size (L x W x H): 61.3x59x20cm Package size (L x W x H): 66x32x33cm |
Package contents | 1 x laser engraver
1 x Instructions for use |
Specific References
No customer reviews for the moment.