- New
QIDI Tech X-Plus 3 3D printer, a fast and reliable FDM 3D printer for high performance materials, offers a very high print speed of 600 mm/s.
With a print acceleration of 20000 35 mm/s² and extruder throughput of 3D printer sporting a CoreXY structure,
QIDI TECH 64-bit
For higher printing speed and improved printing results, QIDI X-Smart 3 adopts Cortex processor -A53 64-bit, which has a 1. 5Ghz frequency, 8G-EMMC and 1G DDR3
Improved surface straightness and reduced error deviation by 60%.
The extruder with 9.
5:1 gear ratio is more stable, stronger and faster.
The new cooling system can reduce the risk of clogging and ensure smooth extrusion.
smoothness.
Klipper's adaptive meshing and purging quickly ensures a first flawless layer for every 3D print.
The dual flexible magnetic HF board face has excellent adhesion, no warping problems, and is easy to remove from prints.
Copper alloy nozzle for better thermal conductivity, smooth printing and more durable.
Hardened steel nozzle for abrasive materials and long-term use.
While both have a maximum printing temperature of 350 degrees Celsius.
With an independent heater which has a maximum temperature of 65 Celsius, QIDI of a room circulation fan with an activated carbon air filter.
The higher the temperature in the heated chamber, the wider the range of materials that can be printed.
The heated chamber ensures that the part is built uniformly without generating internal stresses.
The highly acclaimed QIDI slicer software features both a mode normal and expert mode, which is also easy to get started for beginners.
It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.
The successor to the printer, the QIDI Tech X-PLUS 3 is similar to the more advanced X-MAX 3 but with a slightly smaller build volume and the lack of a carbon air filter.
is quick and easy to install and use.
The QIDI X-PLUS 3 features a CoreXY structure to benefit from extremely fast print speeds of up to 600 mm/s and an acceleration of 20000 600 mm/s².
Klipper firmware helps enable resonance compensation to reduce vibration at high speeds.
Another way to achieve faster and smoother movements comes from the application of carbon rods on the X axis and a lightweight extruder, which helps reduce the weight of the print head with the good adhesion of the print.
The closed construction chamber of the X-PLUS 3 is equipped with a heater independent and can reach 65°C, reducing warping and delamination with high temperature filaments.
The transparent printer cover can be removed for faster cooling of parts when printing with low temperature filaments, such as PLA.
General | Brand: QIDI
Type: 3D Printer Model: X-Plus 3 Color: Gray |
Specification | Technology: FDM
Build volume: 280*280*270mm Printing speed: ≤600 mm/s Extruder flow rate: 35 mm³/s Extruder temp: ≤350°C Hotend (included): Copper alloy nozzle hotend for common materials; Hardened steel nozzle hotend for abrasive materials Auxiliary cooling fan: yes Chamber temperature control: independent chamber heating to 65°C Room circulation fan with activated carbon air filter: Room circulation fan Screen: 5.0 inches, 800*480 touch screen Seal printing: drying box + desiccant Connection options: 150M 2.4G Wi-Fi; USB stick/Ethernet cable Rated power: 800W Recommended filament: PAHT-CF, PET-CF, PA12-CF Compatible filament: PLA, ABS, ASA, PETG, TPU, PC, UltraPA, Nylon, etc. Structure: CoreXY Z axis: Dual Z axis X axis: linear hollow optical axis made of high hardness steel Firmware: Klipper Printing acceleration: 20000 mm/s² Printing precision: ±0.1 mm Filament diameter: 1.75mm Bed leveling: automatic leveling Extruder transmission ratio: 9.5:1 Hot end: ceramic heating core Extruder: High flow direct drive extruder Nozzle diameter: 0.4 mm (0.2,0.6,0.8 mm optional) Hot bed temperature: ≤120 Celsius Printing plate: double-sided flexible magnetic HF plate Filament detection: Yes Resonance compensation: Yes Pressure advance: Yes Voltage: 100-240VAC, 50/60Hz Main processor: Cortex-A53, 64-bit processor, 1.5Ghz, 8G-EMMC, 1G DDR3 Slicer: QIDI Print and other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc. Operating system: Windows, Mac OS, Linux Assembled: assembled and first printed in 10 minutes |
Weight and height | Product weight: 24.3kg
Package weight: 25kg Product size (L x W x H): 511x527x529mm Package size (L x W x H): 630x630x650mm |
Package contents | 1 x 3D Printer
1 x drying box 1 filament of 500 g 1 x filament spool holder 1 x support cover 1 x Power Cord 3 Allen keys (H1.5, H2, H2.5) 1 7 mm wrench 1 x flat head screwdriver 1 0.4 mm nozzle cleaning tool 1 x desiccant 1 x Ethernet Cable 1 x Scraper 1 x glue stick 1 USB 2.0 key 1 spare parts kit. 1 x ordinary hotend 1 x Instructions for use |
Specific References
No customer reviews for the moment.