Advantages

QIDI TECH X-Max 3 3D Printer Main Features

QIDI Tech X-Max 3 3D The printer is based on Klipper, capable of printing at a maximum speed of 600 mm/s with a print acceleration of 20000 mm/s² and an extrusion rate of 35 mm³/s.
Besides the Klipper firmware, the printer also has a high speed extruder and a CoreXY structure, which therefore makes it the best high speed FDM printer in the industrial grade range.

• High speed industrial grade FDM machine
• Print speed up to 600 mm/s
• Heated build chamber
• High-speed extruder with a maximum temperature of 350 °C
• Automatic bed leveling
• Faster speed 600 mm/s
• 325 * 325 * 315 mm
• High flow 35 mm³/ s
• Acceleration: 20000 mm/s²

QIDI TECH X-Max 3 3D printer comes with:

• Two high temperature hotends
• Drying box
• Filament spool
• All necessary tools

New all-in-one frame metal

The all-metal chassis is ultra stable, reinforced by metal crosspieces in the lower part, and resistant to deformation.

Hollow linear optical axis in high-quality steel hardness

Improved surface straightness and error deviation reduced by 60%.
Very durable and does not need frequent maintenance.

CoreXY Structure

With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion inertia and improve motion speed, providing low noise printing experience.

High speed extruder with cooling system

The extruder with 9. 5:1 gear ratio is more stable, stronger and faster.
The new cooling system can reduce the risk of clogging and ensure smooth extrusion.

Two sets of Hot End

Copper alloy nozzle for smooth better thermal conductivity, smooth printing and more durable.
Hardened steel nozzle for abrasive materials and long-term use.
While both have a maximum printing temperature of 350 degrees Celsius.

Temperature-controlled chamber and drying box

With an independent heater which has a maximum temperature of 65 Celsius, QIDI X-Max 3 3D Printer can print high efficiency PET-CF, PAHT-CF, etc.
It also has a chamber circulation fan with an activated carbon air filter.

No separation layer

The higher the temperature in the heated chamber, the wider the range of materials that can be printed.
The heated chamber ensures that the part is built evenly without generating stress internals.

Automatic leveling

Klipper's adaptive meshing and purging quickly ensures a flawless first layer for every 3D print.

Flexible HF board

The double-sided flexible magnetic HF board has excellent adhesion, no deformation problems, and is easy to remove prints.

Excellent user experience

The highly acclaimed QIDI slicer software has both a normal mode and an expert mode, which is also easy to get started for beginners.
It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.

QIDI Tech X-MAX 3 - Designed for Industrial Grade 3D Printing

QIDI Tech X-MAX Plus 3, a high-speed upgrade of the X-MAX model with a larger build volume of 325*325*315mm and a number of improvements aimed at high performance and print quality industrial grade.
Like the X-MAX, the X-MAX 3 comes pre-assembled and ready to run within 10 minutes of unboxing.
The machine is fully enclosed and features Actively heated build chamber with independent heating and a maximum temperature of 65°C, which ensures reliable printing with high-performance thermoplastics.
The chamber is equipped with a circulation fan with an air filter at activated carbon for better printing results and a safe environment.

Based on CoreXY kinematics and equipped with quiet Trinamic TMC2209 stepper drivers, the QIDI X-MAX 3 prints at a ultra-fast speed of 600 mm/s and an acceleration of 20000 9. 5 mm/s² while remaining silent. As a bonus, the resonance compensation function helps reduce the impact of vibrations, ensuring quality high print performance without visible artifacts.
Using carbon rods on the X-axis and a lighter extruder with a 1:3 gear ratio reduces the weight of the entire structure, which allows smoother and faster movements.
The X-MAX 16 has automatic bed leveling in 16 points with a BLTouch sensor to ensure good adhesion of the first layer and avoid deformation parts.

General	Brand: QIDI Type: 3D Printer Model: X-Max 3 Color: Gray
Specification	Technology: FDM Build volume: 325*325*315mm Printing speed: ≤600 mm/s Extruder flow rate: 35 mm³/s Extruder temp: ≤350°C Hotend (included): Copper alloy nozzle hotend for common materials; Hardened steel nozzle hotend for abrasive materials Auxiliary cooling fan: yes Chamber temperature control: independent chamber heating to 65°C Room circulation fan with activated carbon air filter: Yes Screen: 5.0 inches, 800*480 touch screen Seal printing: drying box + desiccant Connection options: 150M 2.4G Wi-Fi; USB stick/Ethernet cable Rated power: 900W Recommended filament: PAHT-CF, PET-CF, PA12-CF Compatible filament: PLA, ABS, ASA, PETG, TPU, PC, UltraPA, Nylon, etc. Structure: CoreXY Z axis: Dual Z axis X axis: linear hollow optical axis made of high hardness steel Firmware: Klipper Printing acceleration: 20000 mm/s² Printing precision: ±0.1 mm Filament diameter: 1.75mm Bed leveling: automatic leveling Extruder transmission ratio: 9.5:1 Hot end: ceramic heating core Extruder: High flow direct drive extruder Nozzle diameter: 0.4 mm (0.2,0.6,0.8 mm optional) Hot bed temperature: ≤120 Celsius Printing plate: double-sided flexible magnetic HF plate Filament detection: Yes Resonance compensation: Yes Pressure advance: Yes Voltage: 100-240VAC, 50/60Hz Main processor: Cortex-A53, 64-bit processor, 1.5Ghz, 8G-EMMC, 1G DDR3 Slicer: QIDI Print and other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc. Operating system: Windows, Mac OS, Linux Assembled: assembled and first printed in 10 minutes
Weight and height	Product weight: 30.2kg Package weight: 35kg Product size (L x W x H): 553x553x601mm Package size (L x W x H): 650x650x720mm
Package contents	1 x 3D Printer 1 x drying box 1 filament of 500 g 1 x filament spool holder 1 x support cover 1 x Power Cord 3 Allen keys (H1.5, H2, H2.5) 1 7 mm wrench 1 x flat head screwdriver 1 0.4 mm nozzle cleaning tool 1 x desiccant 1 x Ethernet Cable 1 x Scraper 1 x glue stick 1 USB 2.0 key 1 spare parts kit. 1 x ordinary hotend 1 x Instructions for use